FLIR CM276 Clamp Meter and Thermal Imaging Camera (2024)

FLIR CM276 Clamp Meter and Thermal Imaging Camera

The FLIR CM276 Clamp Meter and Thermal Imaging camera combines a thermal imaging camera with electrical measurements, for inspecting and troubleshooting on a wide range of things, such as electrical systems, solar panels, pumps, and motors. Through Infrared Guided Measurement (IGM), the CM276 provides the user with a reliable way to identify overloaded hotspots and circuits, from a safe distance. Potentially dangerous issues can be detected without direct contact, with unmatched clarity thanks to FLIR MSX, which adds visible lighting and outlines to thermal images.

The CM276 has built-in LED worklights that offer enhanced visibilty in poorly lit areas. The CM276 has one rechargeable liyhium ploymer battery pack for all-day, and has been drop tested up to 2m (6.5ft), meaning the user can feel confident with their instrument on a wide-range of job sites. When needing to inspect critical assets in a variety of environments, the CM276 is able to give the user streamline insepctions and clear results.

With a resolution of 2MP (1600 x 1200 pixels) and a Field of View of 71° × 56°, the CM276 is purpose-made for fieldwork, whether that be on a solar farm to detect PV issues, or in a data centre or production facility, the Clamp Meter and Thermal Imaging Camera is the perfect tool for the job. It is also IP40 rated, which ensures it is protected whilst in use. The CM276 is supplied with CAT IV 600 V Silicone Test Leads (TA82), a USB Type-A to Type-C Cable, a Soft Carrying Case, a Quick Start Guide, and FLIR Warranty Card.

MSX Image Enhancement

The FLIR CM276 features the unique Multi Spectral Dynamic Imaging (MSX), which adds and enhances key details through the onboard visible light camera to the entire image in real time. The result is an all-in-one, clear thermal picture with visible light features that show the problem areas. MSX is done in real time, so results are instantly viewable on the camera's display.

The FLIR METERLiNK App

With the FLIR METERLiNK Bluetooth app, the user is able to monitor a variety of electrical and environmental conditions simultaneously. Up to seven compatible meters can be connected to the app at one time, allowing for key readings to be kept and shared across networks. The app's dashboard is configured for easy condition monitoring, with both graphical and numerical data able to be viewed in real time. The app also displays min, max, and average reading displays.

Up to 30,000 radiometric images can be stored and analysed on the METERLiNK App, whether that be thermal or visual video clips, or graphical/numerical data, and reports can be generated which enable for the sharing of data across a network or team.

For more information on the METERLiNK App, click here to go to the official FLIR website.

FLIR part number: CM276

Key Features

• Reduces inspection and troubleshooting time during testing
• The advanced thermal and visual camera can reduce troubleshooting time for solar photovoltaic, electrical, and mechanical systems
• Infrared Guided Measurement for non-contact inspections
• Advanced connectivity and analysis through the METERLiNK App
• Data cam be stored and analysed, and also shared to neccessary parties
• Up to 30,000 results can be stored
• Alligns with NFPA 70B requirements